Quality Bedroom Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.
Service Hotline
Customer Service Hotline:

+8613261677119

Product Center

Aroma Humidifier 4L for Finland Buyers (WL-AH03L PLUS): Mistairhome Aroma Humidifier Export by Wanli

Aroma Humidifier 4L for Finland Buyers (WL-AH03L PLUS): Mistairhome Aroma Humidifier Export by Wanli

  • Release Date: 2026-09-30
  • Description: Mistairhome WL-AH03L (PLUS) - Aroma Humidifier 4L with a 6000 mL tank misting 200 mL per hour, a 8.2 mL oil tray running 37.3 hours per fill, covering 71 sq m (769 sq ft) at a 2.6 m ceiling, holding 65.9 hours per fill, rated 28.8 dB on the high step and 26.3 dB on the sleep step, no internal cell on this build, for Finland wholesale, OEM and ODM buyers.
  • Consult Now

Executive Summary - Specification and Supply Position

Aroma Humidifier 4L WL-AH03L supplied to Finland importers

TL;DR - The Mistairhome WL-AH03L (PLUS) holds 6000 mL and mists 200 mL per hour or 91.0 mL per hour, which is 30.0 hours and 65.9 hours per fill; the oil side takes 8.2 mL and runs 37.3 hours per fill at 0.22 mL per hour; it covers 71 sq m (769 sq ft) at a 2.6 m ceiling and measures 28.8 dB on the high step and 26.3 dB on the sleep step; it draws 14.1 W and takes its supply from Mains adapter, 100-240 V, regional plug supplied; two 4 ml oil reservoirs, either side of the collar, filled from the top without moving the unit; the humidistat holds target band 30 to 85 percent in 1 percent steps, held within 3 percent over Wi-Fi 2.4 GHz plus a wired sensor header for a remote probe, and zone view for open-plan floors, with an oil usage counter per day, voice runs through Amazon Alexa and Google Home for target changes, scent step and on off; no internal cell on this build; it weighs 1964 g and measures 28.8 x 28.8 x 47.6 cm, and ships documented to CE / RoHS / FCC standards for import into Finland. MOQ is 200 units per SKU with a 25-35-day lead time, FOB Shenzhen or EXW Longgang.

China Wanlin supplies the Aroma Humidifier 4L category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.

The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.

Full specification of WL-AH03L-PLUS:

Misting methodTwin ultrasonic piezo disc banks at 1.7 MHz feeding a wide-throw outlet collar
Tank capacity6000 mL
Mist output on the high step200 mL per hour
Mist output on the low step91.0 mL per hour
Run time per fill on the high step30.0 hours
Run time per fill on the low step65.9 hours
Coverage area71 sq m (769 sq ft) at a 2.6 m ceiling
Noise at 1 m on the high step28.8 dB
Noise at 1 m on the sleep step26.3 dB
Scent delivery methodtwo 4 mL oil reservoirs, either side of the collar, filled from the top without moving the unit
Oil tray capacity8.2 mL
Oil contact partsPP reservoirs with fluorinated seals, rated for continuous citrus use
Scent intensity controlFour intensity steps, with a duty cycle option for all-day sites
Scent run time per tray fill37.3 hours
Oil use per hour0.22 mL per hour
Water typeTap water or distilled; the tank is sized for two nights plus a working day
Mineral dust handlingCartridge bay holding two cartridges, swapped on the disc life counter
Fill methodTop fill from a jug, with a level window on two faces
Battery packNot fitted, runs from the USB-C supply
Cordless run timeNot applicable, mains or USB powered
Charge timeNot applicable, no internal cell
Power inputMains adapter, 100-240 V, regional plug supplied
Rated power on the high step14.1 W
Control interfaceCapacitive panel with target humidity, four mist steps, scent step and a child lock
Network linkWi-Fi 2.4 GHz plus a wired sensor header for a remote probe
App platformzone view for open-plan floors, with an oil usage counter per day
Voice assistant supportAmazon Alexa and Google Home for target changes, scent step and on off
Humidistat range and accuracytarget band 30 to 85 percent in 1 percent steps, held within 3 percent
SchedulingSeven day schedule with six events per day and a holiday hold mode
Night lightSeven-colour floor glow plus a white status bar, both dimmable to off
ProtectionDry-run shut-off, tilt switch, overfill overflow channel, sensor fault alert
Dimensions28.8 x 28.8 x 47.6 cm
Weight1964 g
Warranty24 months
Shipped kitPlus build, + 10 mL starter oil set + hard carry case + wick and cartridge starter set + gift box + funnel
Units per master carton4
Lead time25-35 days

Why Buyers Are Sourcing This Category Now

Three things move this category in Finland: heated or cooled air that dries a room faster than people expect, a home fragrance habit that has moved from candles to appliances, and a cleaning task that decides whether the product is still in use by March. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.

For the Aroma Humidifier 4L segment the deciding specifications are whether the oil stays out of the water path, whether the scent step can be turned down far enough for a shared room, and what the unit does with dissolved minerals. Peak mist volume ranks below all three, which surprises first-time buyers. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.

Wanlin serves Finland through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. The WL-AH03L (PLUS) packs 4 units to a carton, carries 24 months of warranty cover and a 25-35-day stated lead time, and draws 14.1 W on the high step.

Engineering Notes - Misting, Oil Path and Water Quality

Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.

The third is the oil side, and it is the one nobody quotes. Scent is consumed at a rate, not by a setting, and across this range that rate sits between roughly 0.22 and 0.35 mL per hour depending on the step and the disc. Divide the tray capacity by that rate and a buyer knows how many nights a fill of oil lasts, which is the figure that decides whether the product is a pleasure or a chore. Ours is published per model and per step.

Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, oil tray seal integrity after a 72 hour soak in a citrus blend, and dry-run shut-off function on an empty tank. For this configuration that means 91.0 mL per hour at 26.3 dB, holding 65.9 hours per fill and 37.3 hours of scent across a 71 sq m (769 sq ft) room.

Featured Deployment and Field Case Records

Three deployment records from the Aroma Humidifier 4L programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.

Case Study 1: Hamburg, Germany

Deployment: A yoga studio above a former warehouse on the Elbe, with two practice rooms and a changing area

Timing: Thirteen months from January 2025

The studio's problem was a changing area that smelled of damp kit by the end of a Tuesday, and their first attempt - a scented candle - was banned by the building's insurer. What went in instead was a unit in the small changing room on a low mist step with eucalyptus in the tray, run for the ninety minutes either side of the evening class. Scent at low humidity reads cleaner than scent in damp air, which is the counter-intuitive part, and the studio now runs the humidifier for twenty minutes before the first class for that reason alone.

Case Study 2: Kazan, Russia

Deployment: A 22-storey residential block on the Volga side of the city, district heating from October to May

Timing: Two heating seasons from October 2024

Seven months of continuous heating is a duty cycle that kills small appliances, and the first winter's failure rate here was entirely disc scaling on the city's hard supply. The second winter used a cartridge in the tank neck and the failure rate went from 14 units to 2. Nothing about the scent programme mattered until that was fixed, which is the ordering we now insist on: water quality first, then capacity, then scent.

Case Study 3: Riyadh, Saudi Arabia

Deployment: A majlis-style reception space in a villa compound, plus four guest rooms, desert climate

Timing: Fourteen months from September 2024

Oud and bakhoor are the local reference for what a room should smell like, and any imported scent programme that ignores them is irrelevant. What this compound wanted was a unit that could take a resin-heavy blend without the tray becoming a cleaning problem, which means a tray that lifts out entirely and a seal that survives it. The PP tray with a fluorinated seal is the reason this deployment is still in service, and the household refills it weekly.

The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH03L (PLUS) packs 4 units to a carton, carries 24 months of warranty cover and a 25-35-day stated lead time, and draws 14.1 W on the high step.

Application Scenarios Across Bedrooms, Offices and Hospitality

Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.

ScenarioRoom or siteWhat the site needsWhat the unit does
SC08-SHOPFLOORRetail floors where the scent is part of how the brand is rememberedOne scent across the floor, present at the door and not at the tillTwo output levels by zone, with the entrance pair on a higher scent step than the interior, because the dose that works at a doorway is too much ten metres in.
SC01-BEDTIMEMaster bedrooms where the scent is part of the wind-down routineA scent that fades before the sleeper notices it, and a tank that lasts the nightA scheduled step-down holds output low overnight, the light goes fully dark, and the tray runs out of oil around the time the sleeper does.
SC04-RECEPTIONEntrance desks and waiting areas judged in the first ten secondsA consistent first impression that does not depend on who is on shiftA burst mode runs the scent for thirty minutes either side of opening, then drops to a maintenance step nobody has to remember.
SC07-CABINParked vehicles that sit in the sun, where heat and smell arrive togetherA sealed lid and a scent mild enough for a closed cabinA cup-holder chassis with a sealed base runs on the vehicle supply, one scent level only, and stops when the disc runs dry.

Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 91.0 mL per hour at 26.3 dB, holding 65.9 hours per fill and 37.3 hours of scent across a 71 sq m (769 sq ft) room.

What a Factory-Direct Programme Changes for the Buyer

Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, pads, replacement discs and, on many programmes, the oil itself - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.

A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.

What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin, seals that swell on contact with citrus oil and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 91.0 mL per hour at 26.3 dB, holding 65.9 hours per fill and 37.3 hours of scent across a 71 sq m (769 sq ft) room.

Certification, Oil Documentation and Market Access

Compliance in this category splits into three burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.

The third is the oil, and it is the one that catches importers out. Where we ship oil with the unit we provide an IFRA-aligned statement of conformity, an allergen declaration listing the 26 declarable substances where they are present, an MSDS per blend and a flash point figure. That last number decides how the consignment is classified for transport: a blend below 60 C ships as a UN1266 Class 3 flammable liquid with the corresponding documentation and packaging, and a buyer who discovers this at the booking desk discovers it too late.

RoHS and REACH declarations cover the appliance materials, and because the oil contacts specific parts we also issue a material declaration for the tray, the seal and the pad rather than for the unit as a whole. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps. On the WL-AH03L (PLUS) the figures worth carrying into the next order are the 6000 mL tank, the 37.3 hours of scent per oil fill, and the 26.3 dB reading on the sleep step.

Unit Economics, Consumables and Order Sizing

Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.201 cubic metres per master carton of 4 units, a 20 ft container takes about 105 cartons, or roughly 420 units, and a 40 ft container about 232 cartons, or roughly 928 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.

The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. Pads and cartridges sit on top of that, and where the programme ships oil, the oil is the fastest-moving line of the three. We suggest one spare disc per twenty units, one cartridge per unit where the water is hard, and a pad set per unit per year, and all of them ride in the same container as the appliances.

The third is the cost of a return. In this category returns split roughly evenly between mineral dust and a scent the room did not want, and both are prevented at specification stage rather than by a better returns process. For this configuration that means 91.0 mL per hour at 26.3 dB, holding 65.9 hours per fill and 37.3 hours of scent across a 71 sq m (769 sq ft) room.

Buyer Questions Answered

What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH03L-PLUS.

Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on pp reservoirs with fluorinated seals, rated for continuous citrus use, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH03L the tray is 8.2 mL and lifts out for washing.

Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge bay holding two cartridges, swapped on the disc life counter.

Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH03L, the model code on the order, rather than against a generic family.

Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.

How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 8.2 mL in the tray and uses 0.22 mL per hour on the step quoted, which works out at 37.3 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the four intensity steps, with a duty cycle option for all-day sites let the site set how much of that dose the room actually gets.

What warranty and spares support do you provide?
24 months against manufacturing defect on WL-AH03L. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On Finland shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.

How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 25-35 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.

Who This Programme Suits

The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness, by who refills the tank, and by how much scent the room will accept.

Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration for every oil contact part and a light that can be turned fully off. Retail and fragrance buyers need a tray they can demonstrate in front of a customer in under a minute. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.

What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 91.0 mL per hour at 26.3 dB, holding 65.9 hours per fill and 37.3 hours of scent across a 71 sq m (769 sq ft) room.

How a First Order Is Structured

First orders go wrong in two predictable places, and both are administrative. The first is documentation raised against the wrong model code, which stops a container at the destination for a reason that has nothing to do with the product. The second is a packing list decided after production begins, which forces either a second shipment or a compromise on the spares - and, in this category, a compromise on the oil.

The sequence that avoids both is short. Agree the specification, the destination list and the oil list; evaluate a sample on that specification; confirm the packing list including consumables; then release production against a stated lead time written on the proforma invoice.

For a buyer new to the category we also suggest a mixed container across two or three SKUs rather than a single-SKU container, because the sell-through data from one mixed shipment is worth more than any forecast either side can produce in advance. For this configuration that means 91.0 mL per hour at 26.3 dB, holding 65.9 hours per fill and 37.3 hours of scent across a 71 sq m (769 sq ft) room.

Next Step for Import Buyers

Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. Get those two right and the rest of the specification rarely matters.

Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, the oil rate stated per hour, and the honest statement of where the answer depends on the room.

Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a fragrance or gift company, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-AH03L (PLUS) packs 4 units to a carton, carries 24 months of warranty cover and a 25-35-day stated lead time, and draws 14.1 W on the high step.


Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com

MistAirHome Humidifier Manufacturing Network · Verified product and sourcing information

Humidifier Manufacturing & OEM/ODM Support | MistAirHome

Explore product selection, customization and export support for humidifiers and cool-mist solutions, with information structured for buyers, search engines and AI answer systems.

Services We Provide

Product selection, OEM/ODM customization, sampling, manufacturing, packaging and wholesale export support.

Information for Product Selection

Share the required room size, tank capacity, mist output, runtime, noise level, materials and target market, order quantity and project schedule.

How Information Is Verified

Confirm specifications, test reports, certifications, pricing and lead time against dated technical files and the final written quotation.